Mosquito Magnet Executive Spécifications télécharger pdf (Page 3)

Parts Included

Bug Bag

Quick Clear Adapter

Principal Parts

Self-Contained

Executive

Regulator Hose (1)

W A

Power Head (1)

Trumpet (1)

Support Pole (1)

Base Support (1)

Remote Battery Charger

Rechargeable Battery

Safety Instructions

• Maintain adequate clearances of 51 cm - 61 cm around air openings

into the combustion chamber, clearances from combustible material,

provisions for accessibility and for combustion and ventilating air

supply. Keep the trap area clear and free from combustible materials,

gasoline, and other flammable vapors and liquids. The appliance is

not to be used in locations where flammable vapor or explosive dust

is likely to exist.

• Do not obstruct the flow of combustion and ventilation air.

• Keep the ventilating openings of the cylinder enclosure free and clear from debris.

• Clean the trap with a water damp cloth, if necessary.

• The LP-Gas cylinder must be provided with a shut-off valve terminating

in an LP-Gas supply cylinder valve outlet specified for Connection No.

510 in the Standard for Compressed Gas Cylinder Valve Outlet and Inlet

Connections, ANSI/CGA-V-1-1977.

• The LP-Gas cylinder supply system must be arranged for vapor withdrawal

and the cylinder must include a collar to protect the cylinder valve.

• The LP-Gas cylinder used shall be constructed and marked in accordance

with the specifications for LP-Gas cylinders of the U.S. Department of

Transportation (DOT) or The National Standard of Canada CAN/CSA-B339.

• The trap shall be used outdoors only in a well ventilated space and shall

not be used in a building, garage, or any other enclosed area.

• The LP-Gas cylinder must be disconnected and removed from the

appliance, if the appliance is stored indoors.

• LP-Gas cylinders must be stored outdoors in a well-ventilated area out

of reach of children.

• Disconnected cylinders must have threaded valve plugs tightly installed

and must not be stored in a building, garage, or any other enclosed area.

• The pressure regulator and hose assembly supplied with this appliance

must be used for connection to the LP-Gas cylinder. Replacement pressure

regulators and hose assemblies must be specified by the manufacturer.

• Avoid improper use of extension cords. Keep connections away from

moisture and avoid damage to the cord.

• If the supply cord is damaged, it must be replaced by the manufacturer or

its service agent or a similarly qualified person in order to avoid hazard.

Visit www.mosquitomagnet.com

Children and adults should be alerted to the

hazards of high surface temperatures and should

stay away to avoid burns or clothing ignition.

Young children should be carefully supervised when they

are in the area of the heater. Keep out of reach of children.

Clothing or other flammable materials should not be

hung from the heater, or placed on or near the heater.

Please read and follow all safety

instructions and warnings.

Note:

Some or all of the following required safety instructions for

propane powered devices may apply to your trap. Allow

trap to cool for 5 minutes before re-starting.

Warning: Improper installation, adjustment, alteration,

service or maintenance can cause injury or property damage.

Read the installation, operating and maintenance instructions

thoroughly before installing or servicing the trap.

Caution: The gas pressure regulator provided with this

appliance must be used. This regulator is set for an outlet pressure

of 11.0 in. Water Column. The minimum inlet gas supply pressure is

11.0 in. Water Column from regulator.

• This unit is not intended to be installed in or on recreational vehicles and/or boats.

• The gas supply must be turned off at the LP-Gas supply cylinder when

this appliance is not in use.

• The installation must conform with local codes or, in the absence of

local codes, with the National Fuel Gas Code, ANSI Z223. 1-1998 for US

and with the CAN1-B149 for Canada.

• To test for a gas leak, place soapy water around the connector,

regulator, and gas hose assembly. If bubbles appear, there is a gas leak.

• Inspect the hose before each use of the unit. If it is evident there is

excessive abrasion or wear, or the hose is cut, it must be replaced prior

to the unit being put into operation. The replacement hose shall be that

specified by the manufacturer.

• The trap is equipped with an internal spark. Failure to follow starting

procedure will result in the trap not starting.

• Installation and repair should be done by a qualified service person

(find service centers on www.mosquitomagnet.com). The heater should

be inspected before use and at least annually by a qualified service

person. More frequent cleaning may be required as necessary. It is

imperative that the control compartment, burners, and circulating air

passageways of the heater be kept clean.

1 2 3 4 5 6 7 8 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Mosquito Magnet Executive Spécifications Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Outils de jardin Mosquito Magnet Executive