Mosquito Magnet Patriot Manuel du propriétaire télécharger pdf (Page 5)

Set-Up

Propane Tank Installation

1. After trap is placed in its ideal location, place propane

tank onto the molded cradle.

2. Make sure propane tank is fully closed. Attach

propane regulator hose to propane tank. Secure

tightly by hand. Do not use tools.

3. Turn propane on by slowly turning valve counter-

clockwise. T

ake care not to turn too quickly to avoid

engagement of safety valve.

DO NOT MOVE TRAP WITH TANK ATTACHED!

TANK MUST BE DISCONNECTED FROM REGULATOR

BEFORE TRAP IS RELOCA

TED TO AVOID DAMAGE TO

REGULATOR AND/OR TRAP. BE ADVISED, DAMAGE

CAUSED FROM FAILURE TO COMPLY WITH THIS

INSTRUCTION IS NOT COVERED UNDER WARRANTY.

Trap Placement

1. Determine the direction of the prevailing wind.

Check local weather patterns if you are unsure.

2. Stand in the center of the area you are trying to protect

and look toward the prevailing wind.

3. Proper placement of the trap will be 10 meters

in front of you, within 1.5 meters of ground cover (i.e.

bushes, flowerbeds, tree line, marshbed). Ensure that

trap is not directly against any blockades such as buildings,

fences, etc.

4. It is recommended that the trap be placed in the shade.

5. Do not place trap directly above a water source

(sprinklers, hose, etc.).

6. Trap must be placed on level ground to avoid tipping

or uneven propane distribution.

7. For optimal trap placement in your yard, refer to the

instructional CD-ROM included with your trap; or, go to

www.mosquitomagnet.com to build your own yard

diagram for correct trap placement.

Burying the Power Cord

Make sure unit is unplugged and in proper position. Use

the Cord Burying Clips supplied. Place clips approximately 3

feet apart, press into ground by hand making sure not to

damage power cord. For alternate placement, follow

steps illustrated below.

1. Use straightedge shovel or garden spade and dig a

trench about 3”- 4” deep from power source to trap.

2. Place cord into trench carefully stretching as you go to

remove any twists in cord.

3. Use cedar shingle or folded cardboard to place cord into

bottom of trench. Recover the trench with removed soil.

Step 1 – Propane Tank Placement

Step 2 – Attach Regulator

Step 3 – Slowly Open Valve

1 2 3 4 5 6 7 8 9 10 ... 34 35

Commentaires sur ces manuels

Pas de commentaire

Mosquito Magnet Patriot Manuel du propriétaire Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Outils de jardin Mosquito Magnet Patriot